Board-up, soot removal, and smoke odor control, day or night

24 hour Fire Restoration in VENTURA, California

24 hour Fire Restoration in VENTURA, California means a crew on your property within the hour, not a voicemail box. We handle emergency board-up, soot and char removal, water extraction from firefighting lines, and 24/7 fire damage restoration VENTURA California homeowners call at 2 a.m. One call starts the whole job.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Experienced Fire Damage Restoration professionals at work
Careful work. Honest options.
About this service

What 24 hour Fire Restoration in VENTURA, California Covers

24 hour Fire Restoration in VENTURA, California is an emergency response service that stabilizes a fire-damaged home or business the same night, then rebuilds it to code. The first hours matter most: charred framing keeps off-gassing, soot etches glass and brass, and water from the hoses soaks into drywall and insulation. Our crew arrives with air scrubbers, HEPA vacuums, and thermal imaging cameras to map heat damage inside walls before anything gets torn out.

Most VENTURA calls come from kitchen grease fires, attic wiring faults, and electrical fires in older pier-and-beam homes. Smoke travels through HVAC ducts and settles into closets and crawlspaces, so the smell lingers long after the flames are out. If you are searching for 24 hour fire restoration near me VENTURA California at midnight, we answer live and dispatch. We also handle 24/7 fire damage restoration in VENTURA near me requests for rentals and commercial buildings.

  • ✓ Soot Stops Etching
  • ✓ Mold Never Starts
  • ✓ Odor Leaves With Us
  • ✓ Insurance Moves Faster
What's included

What 24 hour Fire Restoration Includes

Every job starts with the same core scope: secure the property, remove the water and debris, clean and deodorize, then rebuild. What changes is the size of the fire and how far the smoke traveled. Here is what is standard on our VENTURA jobs.

✓

Emergency Board-Up and Tarp

Windows, doors, and roof openings get sealed the same night so weather and theft cannot add to your loss. We use plywood, roof sheathing, and fire-rated caulk where the opening meets the structure.

✓

Water Extraction and Drying

Firefighting leaves standing water in floors and walls. We extract it with truck-mounted units, then run air movers and dehumidifiers until moisture meter readings return to normal. Daily logs go to your adjuster.

✓

Soot and Char Removal

Dry-sponging, HEPA vacuuming, and soda blasting remove soot from framing, masonry, and hard surfaces. Charred drywall, insulation, and lumber framing come out and get hauled away.

✓

Odor Neutralization

Thermal fogging, hydroxyl generators, and charcoal activated filters treat the whole structure, including HVAC ducts and closets. We seal cleaned surfaces with a smoke sealant primer so odor does not bleed back through paint.

✓

Structural Rebuild to Code

Our licensed general contractor replaces drywall, insulation, framing, and roof sheathing, pulls permits through the city, and schedules inspections. You get a finished, code-compliant structure, not just a cleaned shell.

How it works

What to Expect From Call to Rebuild

01

Call and Dispatch

You call and reach a live person, not a call center. We take the address, the type of fire, and whether the structure is safe to enter. A crew rolls within the hour, 24 hours a day. If the fire marshal or utility company still has the property red-tagged, we coordinate access before we arrive.

02

Secure and Assess

First we board windows, tarp the roof, and lock the doors so the structure is weather-tight and secure. Then we walk the property with a thermal imaging camera and moisture meter, mapping char, hidden heat pockets, and water intrusion. You get a written scope and photos before demolition starts.

03

Water and Debris Out

We extract standing water with truck-mounted units, pull saturated drywall and insulation, and bag charred debris for haul-away. Air movers and dehumidifiers run around the clock. This phase usually takes one to three days depending on how much water the hoses left behind.

04

Clean, Deodorize, Seal

Soot sponges, HEPA vacuums, and soda blasting clean framing and masonry. We fog with a thermal fogger, run hydroxyl generators, and seal cleaned surfaces with a smoke sealant primer and encapsulant sealer. Ductwork gets cleaned or replaced so the HVAC does not redistribute odor.

05

Rebuild and Walkthrough

Our licensed general contractor replaces drywall, insulation, lumber framing, roof sheathing, and plywood to California code. We pull permits, schedule inspections, and finish with paint, flooring, and trim. You walk the finished job with us before we close the file.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Thermal imaging camera

Finds hidden heat pockets inside walls and ceilings before demolition, so we do not open a wall and find live char behind it.

HEPA vacuum and soot sponge

Pulls fine soot out of porous surfaces without grinding it deeper. Dry-sponging first is what saves paint and fixtures.

Thermal fogger and hydroxyl generator

Neutralizes smoke odor at the source. Foggers reach cavities and ducts; hydroxyl generators run safely in occupied spaces.

Air scrubber with charcoal activated filters

Scrubs airborne particles and odor during demolition and drying. We run them continuously until the air test clears.

Moisture meter and Dri-Eaz dehumidifier

Tracks water left by firefighting hoses. Daily readings tell us when the structure is actually dry, not just dry to the touch.

Soda blaster and pry bar

Soda blasting cleans char off framing and masonry without gouging the wood. Pry bars and drywall saws handle controlled demolition.

Air mover and Phoenix Restoration Equipment

Moves high-volume air through wet cavities to speed drying. Phoenix and Dri-Eaz units are what our crews run on every water-heavy job.

Real results

Before and after.

Midtown Kitchen Fire, Saved Cabinets

Before

A grease fire scorched the range hood and left soot across the kitchen ceiling and living room. The cabinets were coated in sticky residue, and the smell had reached the bedrooms. The homeowner called at 11 p.m. and expected to lose the kitchen.

After

We boarded the window, degreased the cabinets and hood, and ran hydroxyl generators overnight. Soot sponges and HEPA vacuums cleaned the living room. The cabinets were saved, and the kitchen was back in service in eight days at roughly $6,200 instead of a full gut.

Ondulando Attic Fire, Roof Rebuilt

Before

An electrical fault in the attic burned through roof sheathing and charred two rafters. The fire department soaked the ceiling below, and water ran into a hallway closet. The roof was open to the weather with rain forecast in two days.

After

We tarped the roof the same night, removed charred sheathing and insulation, and dried the ceiling framing with air movers and dehumidifiers. The two rafters were sistered and the roof deck rebuilt. Moisture readings returned to normal in four days, and the roof passed inspection in 12.

Pierpont Bay Rental, Claim Closed Clean

Before

An electrical fire in a rental unit left the property red-tagged and the tenant displaced. The landlord had no documentation, and the carrier was asking for a scope before it would release funds. The unit sat for a week before the call.

After

We documented every room with photos and moisture readings, wrote the scope in Xactimate, and boarded the unit the same day. The electrician replaced melted wiring, and the rebuild finished in five weeks. The claim closed without dispute, and the unit was re-rented the following month.

Problems we solve

Problems We Solve After a Fire

The fire is out, but the damage keeps working. These are the problems VENTURA homeowners call us about most, and how we shut each one down.

Ask a pro →
01

Smoke odor lingers after fire

We locate the source with thermal imaging and duct inspection, then use thermal foggers, hydroxyl generators, and charcoal activated filters to neutralize it. Surfaces get sealed with a smoke sealant primer so odor cannot bleed back through new paint.

↗
02

Soot staining on walls and ceilings

We dry-sponge and HEPA-vac the surface first, then clean with the right agent for the residue type. Stained drywall gets sealed with an encapsulant sealer before paint. Ceilings and walls come out uniform, not patchy.

↗
03

Water damage from firefighting efforts

We extract standing water, pull saturated materials, and set air movers and dehumidifiers with daily moisture meter logs. Drying is documented for your adjuster, and we treat any mold risk before the rebuild starts.

↗
04

Melted wiring and electrical hazards

We map heat damage with a thermal imaging camera and coordinate with a licensed electrician to replace melted wiring and damaged panels before we close up walls. The rebuild does not proceed until the electrical system passes inspection.

↗
Proof you can check

Licensed, Certified, and Insured

✓
IICRC FSRT (Fire and Smoke Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC OCT (Odor Control Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
California CSLB General B Contractor LicenseCalifornia Contractors State License Board
✓
RIA (Restoration Industry Association) MemberRestoration Industry Association
Good questions

Frequently Asked Questions

(833) 929-6186 →

Most VENTURA fire restoration jobs run $3,500 to $18,000 for emergency stabilization and cleanup, with full rebuilds climbing higher. A small kitchen fire with limited soot often lands near $4,000 to $7,000. Whole-room fires with structural damage push past $15,000. Your insurance usually covers most of it. We provide a written scope before work begins so you see the numbers up front.

We do. Our line is answered live 24 hours a day, every day of the year, and we dispatch crews across VENTURA from Downtown to Saticoy. You reach a person, not a recording, and we give you an arrival window on the call. If you are searching at 2 a.m. after a fire, call and we will roll.

Our target is 60 minutes from your call to arrival anywhere in VENTURA. Most nights we beat that. If the fire department still has the scene active or the gas company has not cleared the property, we stage nearby and move in the moment access opens. We text you the technician's name and ETA as soon as we dispatch.

Yes. We document with photos, moisture readings, and an Xactimate scope that most carriers accept directly. We can bill your insurer and walk you through the claim, and we will speak with your adjuster on your behalf. You are responsible for your deductible, and we tell you that number before work starts so there are no surprises.

Ready when you are

Call for 24 hour Fire Restoration in VENTURA, California

One call reaches a live person, and a crew rolls within the hour. We board up, extract water, and start soot and odor work the same night. Call (833) 929-6186 now.

Call Now (833) 929-6186 →
Request an appointment

Contact Our VENTURA Fire Restoration Team

Call us any hour at (833) 929-6186 and a live dispatcher will take your details and dispatch the closest crew. We answer 24/7, including holidays, and we give you a real arrival window instead of a vague promise. You can also email us at info@firedamagerestorationventura.com or stop by our office during business hours.

Request received — our team will be in touch shortly.
Tap to call(833) 929-6186